Helmet, Pressure Bubble, Armstrong, Apollo 11, Flown

This pressure helmet was made for Neil Armstrong for use during the Apollo 11 mission in July 1969.

The Apollo pressure helmet was a transparent bubble designed to attach to the spacesuit neck ring. It was constructed of a polycarbonate shell with a red anodized aluminum neck ring, a feed port, a vent pad and duct assembly attached to the rear and a valsalva device attached to the inner ring. The valsalva device was installed so that the astronaut could "blow" his nose to prevent his ears from "popping" during the rapid ascent of launch.

There were two configurations of these pressure bubbles used on Apollo suits which were not interchangable. The style used during the Apollo missions 7 through 10 was of anodized blue aluminum, while those used from Apollo 11 through the end of the program were of anodized red aluminum.

Transferred to the National Air and Space Museum from NASA in 1971.

Transferred from NASA, Johnson Space Center

Country of Origin
United States of America

Manufacturer
Air Lock Inc.
Designer
Dr. Robert L. Jones
Subcontractor
Hamilton Standard
Contractor
ILC Industries Inc.
Designer
James H. O'Kane
Astronaut
Neil Armstrong, August 5, 1930--August 25, 2012

Type
PERSONAL EQUIPMENT-Helmets & Headwear

Materials
Neck Disconnect: Anodized aluminium
Overall: Polycarbonate, Velcro, anodized aluminium
Dimensions
3-D: 22.9 x 22.9 x 25.4cm (9 x 9 x 10 in.)
Other (Neck disconnect): 24.8cm (9 3/4 in.)

This pressure helmet was made for Neil Armstrong for use during the Apollo 11 mission in July 1969.

The Apollo pressure helmet was a transparent bubble designed to attach to the spacesuit neck ring. It was constructed of a polycarbonate shell with a red anodized aluminum neck ring, a feed port, a vent pad and duct assembly attached to the rear and a valsalva device attached to the inner ring. The valsalva device was installed so that the astronaut could "blow" his nose to prevent his ears from "popping" during the rapid ascent of launch.

There were two configurations of these pressure bubbles used on Apollo suits which were not interchangable. The style used during the Apollo missions 7 through 10 was of anodized blue aluminum, while those used from Apollo 11 through the end of the program were of anodized red aluminum.

Transferred to the National Air and Space Museum from NASA in 1971.

Transferred from NASA, Johnson Space Center

Country of Origin
United States of America

Manufacturer
Air Lock Inc.
Designer
Dr. Robert L. Jones
Subcontractor
Hamilton Standard
Contractor
ILC Industries Inc.
Designer
James H. O'Kane
Astronaut
Neil Armstrong, August 5, 1930--August 25, 2012

Type
PERSONAL EQUIPMENT-Helmets & Headwear

Materials
Neck Disconnect: Anodized aluminium
Overall: Polycarbonate, Velcro, anodized aluminium
Dimensions
3-D: 22.9 x 22.9 x 25.4cm (9 x 9 x 10 in.)
Other (Neck disconnect): 24.8cm (9 3/4 in.)

ID: A19730040006