On their path to the first successful powered airplane, the 1903 Wright Flyer, the Wright brothers built three full-size gliders to test their design ideas regarding control, aerodynamics, and structures. The first one in 1900 produced less lift than the brothers' calculations predicted, but its wing-warping system for lateral control and forward elevator for pitch control worked beautifully. The Wrights primarily flew the 1900 glider as a kite, with no pilot aboard, to test its performance, but they did make a few free glides with Wilbur Wright as pilot, totaling two minutes in the air.
None of the three experimental Wright gliders exist. The Wrights did not preserve them because they saw them merely as research tools, and they were rather beat up from testing. This reproduction was built during the 2003 Wright centennial year. Numerous groups and individuals built reproduction Wright aircraft to celebrate the first century of powered flight and to learn more about the Wright brothers' inventive process.
Gift of Ken Hyde and the Wright Experience Team.
Country of Origin: United States of America
Wingspan: 5.2 m (17 ft)
Length: 3.4 m (11 ft 2 in)
Height: 1.3 m (4 ft 3 in)
Weight: 23.6 kg (52 lb)
Framework: spruce and ash
Full-size reproduction of the Wright brothers' 1900 glider, built in 2003. Fabric-covered wooden-frame biplane, with no vertical tail. Only a horizontal forward elevator. Natural fabric finish; no sealant or paint of any kind.
On December 17, 1903, the Wright brothers inaugurated the aerial age with their successful first flights of a heavier-than-air flying machine at Kitty Hawk, North Carolina. This airplane, known as the Wright Flyer, sometimes referred to as the Kitty Hawk Flyer, was the product of a sophisticated four-year program of research and development conducted by Wilbur and Orville Wright beginning in 1899. During the Wrights' design and construction of their experimental aircraft they also pioneered many of the basic tenets and techniques of modern aeronautical engineering, such as the use of a wind tunnel and flight testing as design tools. Their seminal accomplishment encompassed not only the breakthrough first flight of an airplane, but also the equally important achievement of establishing the foundation of aeronautical engineering.
The Wright brothers had a passing interest in flight as youngsters. In 1878 their father gave them a toy flying helicopter model powered by strands of twisted rubber. They played and experimented with it extensively and even built several larger copies of the device. They also had some experience with kites. But not until 1896, prompted by the widely publicized fatal crash of famed glider pioneer Otto Lilienthal, did the Wrights begin serious study of flight. After absorbing what materials related to the subject the brothers had available locally, Wilbur wrote to the Smithsonian Institution on May 30, 1899, requesting any publications on aeronautics that it could offer.
Shortly after their receipt of the Smithsonian materials, the Wrights built their first aeronautical craft, a five-foot-wingspan biplane kite, in the summer of 1899. The Wrights chose to follow Lilienthal's lead of using gliders as a stepping stone towards a practical powered airplane. The 1899 kite was built as a preliminary test device to establish the viability of the control system that they planned to use in their first full-size glider. This means of control would be a central feature of the later successful powered airplane.
Rather than controlling the craft by altering the center of gravity by shifting the pilot's body weight as Lilienthal had done, the Wrights intended to balance their glider aerodynamically. They reasoned that if a wing generates lift when presented to an oncoming flow of air, producing differing amounts of lift on either end of the wing would cause one side to rise more than the other, which in turn would bank the entire aircraft. A mechanical means of inducing this differential lift would provide the pilot with effective lateral control of the airplane. The Wrights accomplished this by twisting, or warping, the tips of the wings in opposite directions via a series of lines attached to the outer edges of the wings that were manipulated by the pilot. The idea advanced aeronautical experimentation significantly because it provided an effective method of controlling an airplane in three-dimensional space and, because it was aerodynamically based, it did not limit the size of the aircraft as shifting body weight obviously did. The satisfactory performance of the 1899 kite demonstrated the practicality of the wing warping control system.
Encouraged by the success of their small wing warping kite, the brothers built and flew two full-size piloted gliders in 1900 and 1901. Beyond the issue of control, the Wrights had to grapple with developing an efficient airfoil shape and solving fundamental problems of structural design. Like the kite, these gliders were biplanes. For control of climb and descent, the gliders had forward-mounted horizontal stabilizers. Neither craft had a tail. The Wrights' home of Dayton, Ohio, did not offer suitable conditions for flying the gliders. An inquiry with the U.S. Weather Bureau identified Kitty Hawk, North Carolina, with its sandy, wide-open spaces and strong, steady winds as an optimal test site. In September 1900, the Wrights made their first trip to the little fishing hamlet that they would make world famous.
The Wrights primarily flew the 1900 glider as a kite, with no pilot aboard, to test its performance, but they did make a few free glides with Wilbur Wright as pilot, totaling two minutes in the air. Although the control system worked well and the structural design of the craft was sound, the lift of this, as well as their second glider in 1901, was substantially less than the Wrights' earlier calculations had predicted. They began to question seriously the aerodynamic data that they had used. Now at a critical juncture, Wilbur and Orville decided to conduct an extensive series of tests of wing shapes. They built a small wind tunnel in the fall of 1901 to gather a body of accurate aerodynamic data with which to design their next glider. The heart of the Wright wind tunnel was the ingeniously designed pair of test instruments that were mounted inside. These measured coefficients of lift and drag on small model wing shapes, the terms in the equations for calculating lift and drag about which the brothers were in doubt.
The Wrights' third glider, built in 1902 based on the wind tunnel experiments, was a dramatic success. The lift problems were solved, and with a few refinements to the control system (the key one being a movable vertical tail), they were able to make numerous extended controlled glides. They made between seven hundred and one thousand flights in 1902. The single best one was 191.5 m (622.5 ft) in twenty-six seconds. The brothers were now convinced that they stood at the threshold of realizing mechanical flight.
During the spring and summer of 1903 they built their first powered airplane. Essentially a larger and sturdier version of the 1902 glider, the only fundamentally new component of the 1903 aircraft was the propulsion system. With the assistance of their bicycle shop mechanic, Charles Taylor, the Wrights built a small, twelve-horsepower gasoline engine. While the engine was a significant enough achievement, the genuinely innovative feature of the propulsion system was the propellers. The brothers conceived the propellers as rotary wings, producing a horizontal thrust force aerodynamically. By turning an airfoil section on its side and spinning it to create an air flow over the surface, the Wrights reasoned that a horizontal "lift" force would be generated that would propel the airplane forward. The concept was one of the most original and creative aspects of the Wrights' aeronautical work. The 1903 airplane was fitted with two propellers mounted behind the wings and connected to the engine, centrally located on the bottom wing, via a chain-and-sprocket transmission system.
By the fall of 1903, the powered airplane was ready for trial. A number of problems with the engine transmission system delayed the first flight attempt until mid-December. After winning the toss of a coin to determine which brother would make the first try, Wilbur took the pilot's position and made an unsuccessful attempt on December 14th, damaging the Flyer slightly. Repairs were completed for a second attempt on December 17. It was now Orville's turn. At 10:35 a.m. the Flyer lifted off the beach at Kitty Hawk for a twelve-second flight, traveling 36 m (120 ft). Three more flights were made that morning, the brothers alternating as pilot. The second and third were in the range of two hundred feet. With Wilbur at the controls, the fourth and last flight covered 255.6 m (852 ft) in 59 seconds. With this final long, sustained effort, there was no question the Wrights had flown.
None of the three experimental Wright gliders exist. The Wrights did not preserve them because they saw them merely as research tools and they were rather beat up from testing. This reproduction of the 1900 glider was built during the 2003 Wright centennial year. Numerous groups and individuals built reproduction Wright aircraft to celebrate the first century of powered flight and to learn more about the Wright brothers' inventive process.