Model, Camera, Mars, Pathfinder Lander

Model, Camera, Mars, Pathfinder Lander

     

The Imager For Mars Pathfinder (IMP) consists of three physical subassemblies: (1) camera head (with stereo optics, filter wheel, charge-coupled device (CCD) and pre-amp, mechanisms and stepper motors); (2) extendable mast with electronic cabling; and (3) two plug-in electronics cards (CCD data card and power supply/motor drive card) which plug into slots in the Warm Electronics Box within the lander. A number of atmospheric investigations are carried out using IMP images. A magnetic properties investigation is also included as part of that investigation. This instrument was assembled into the Mars Pathfinder Lander in 2003.

NASA transferred this camera to the Museum with the Pathfinder engineering model in 1999.

Transferred from Jet Propulsion Laboratory, California Institute of Technology

Country of Origin
United States

Manufacturer
Jet Propulsion Laboratory, California Institute of Technology

Location
Steven F. Udvar-Hazy Center, Chantilly, VA
Hangar
James S. McDonnell Space Hangar

Type
SPACECRAFT-Unmanned-Parts & Structural Components

Materials
Metal, electronics components, plastic
Dimensions
Overall: 2ft 10 1/2in. x 1ft x 9in. (87.6 x 30.5 x 22.9cm)

The Imager For Mars Pathfinder (IMP) consists of three physical subassemblies: (1) camera head (with stereo optics, filter wheel, charge-coupled device (CCD) and pre-amp, mechanisms and stepper motors); (2) extendable mast with electronic cabling; and (3) two plug-in electronics cards (CCD data card and power supply/motor drive card) which plug into slots in the Warm Electronics Box within the lander. A number of atmospheric investigations are carried out using IMP images. A magnetic properties investigation is also included as part of that investigation. This instrument was assembled into the Mars Pathfinder Lander in 2003.

NASA transferred this camera to the Museum with the Pathfinder engineering model in 1999.

Transferred from Jet Propulsion Laboratory, California Institute of Technology

Country of Origin
United States

Manufacturer
Jet Propulsion Laboratory, California Institute of Technology

Location
Steven F. Udvar-Hazy Center, Chantilly, VA
Hangar
James S. McDonnell Space Hangar

Type
SPACECRAFT-Unmanned-Parts & Structural Components

Materials
Metal, electronics components, plastic
Dimensions
Overall: 2ft 10 1/2in. x 1ft x 9in. (87.6 x 30.5 x 22.9cm)

ID: A19990073006