Foil: 17 Panel: 1 Column: 2 Line: 14

Wall of Honor Level:
Air and Space Friend

Honored by:

EDUCATION

Mr. Jahingir received his Master of Science in Engineering (Mechanical) from Texas A&M University, Prairie View, TX in December 2002. He received his Bachelor of Science in Mechanical Engineering from Bangladesh University of Engineering & Technology in August 1999. He has also completed course work for a Ph.D. in Mechanical Engineering from University of Houston, TX.

Professional Accomplishment

Mr. Jahingir made a very significant contribution in optimizing the inlet/ejector system of a Rocket Based Combined Cycle Engine. His optimized RBCC powered systems can provide significant advantages in all flight Mach numbers, weight, payload, and cost over competing conventional propulsion solutions. Moreover, compared to conventionally powered rocket vehicles, Mr. Jahingir' research will significantly reduce vehicle weight by eliminating a significant amount of its required on-board oxidizer. This research was done at Computational Fluid Dynamic Institute, Prairie View, TX in collaboration with NASA Marshal Space Flight Center.

PROFESSIONAL REGISTRATIONS, SOCIETIES AND HONORS

Mr. Jahingir was honored as "Outstanding Graduate Student" for the year 2001-2002 from Texas A&M University, Prairie View, for his excellence in research.
Mr. Jahingir is a member of American Society of Mechanical Engineers (ASME) and American Institute of Aeronautics & Astronautics (AIAA).

SELECTED PUBLICATIONS

Jahingir, Nayem; Huque, Ziaul; "Design Optimization of Rocket Based Combined Cycle Engine Inlet/Ejector System" Proceedings of 39th AIAA/ASME/ SAE/ASEE Joint Propulsion conference, July 2003, AIAA-2003-5232.

Jahingir, Nayem; Huque, Ziaul; Alam Shaheen; "Performance Analysis of Optimized Rocket Based Combined Cycle Engine " Proceedings of International Conference of Mechanical Engineering, 19-31 December, 2003, Dhaka, Paper Number: ICME03-AM-53

Huque, Ziaul; Jahingir, Nayem; "Application of Collaborative Optimization on a Rocket Based Combined Cycle Engine Inlet/Ejector System," Proceedings of 38th AIAA/ASME/ SAE/ASEE Joint Propulsion conference, July 2002, AIAA-2002-3604.

Huque, Ziaul; Jahingir, Nayem; "CFD Simulation of Rocket Based Combined Cycle Engine Operating at Rocket Ejector Mode," Proceedings of 4th International Conference on Mechanical Engineering, Vol III, pp. 173-178.

Huque, Zakirul; Huque, Ziaul; Jahingir, Nayem; "A New Method to Improve Pyrometry Results," Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, IMECE2001/PID-25611.