Long cylinder, cutaway, showing two main chambers, one, at front end of cylinder painted glossy red inside and with glossy yellow rod running down middle of it, this rod affixed at both end by yellow discs; each disc with white plastic ring around middle; other chamber, at other (rear) end of long cylinder, painted semi-glossy dark green; smaller chamber, painted pale green, at rear end of dark green chamber, this chamber tapering down towards rear of fin section of rocket; same pale green chamber appears to be small rocket combustion chamber with rocket nozzle; two of the four folding fins in fin section of rocket, behind or at rear of pale green engine section, can be easily folded out, while the other two fins are imbedded with fin section; in between fin section is long narrow channel, apparently for escaping exhaust gases from nozzle at end of pale green chamber; fins, long, straight-edged; forward or front end of rocket cylinder, above red chamber, is larger diameter, but shorter cylinder, cutaway, painted glossy black and evidently simulating igniter or gas pressurant composition; short, thin blue plastic insulated electrical wire strands projecting from bottom of cylinder on rear of small cutaway cylinder; overall outside of rocket cylinder, aluminum color; the entire long rocket body cylinder mounted on long rectangular varnished wooded display stand, by four alternating aluminum and plexi attachment fixtures; small rectangular black plastic label affixed at angle in front of stand, with white lettering, reading "XLR-1"; rocket is in excellent condition, save for minor surface rusting on end of igniter.